QT636 Interface Unit c/w Remote Socket

QT636 Interface Unit c/w Remote Socket

C-TEC
SKU:
QT636
£47.07
Width:
8.70 (cm)
Height:
8.70 (cm)
Depth:
3.30 (cm)
Current Stock:
Adding to cart… The item has been added
Description

Quantec Interface Unit c/w Remote Socket

 QT636

  • Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec.
  • Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation).
  • Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.
  • When the device connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.
  • Mounts on a standard UK 25mm single gang back box.

Quiescent current 1mA.
Alarm current 1mA.
Connections N-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia care controller.
Onboard 6.35mm Remote Jack Socket Yes, can be configured to accept a n/o or n/c jack plug.
Onboard Sounder No.
Onboard Infrared Receiver No.
Product dimensions (mm) 87 W x 87 H x 33 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finish Plastic.
IP Rating IP20.
Weight 68g
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.