QT604 Door Monitoring Point

QT604 Door Monitoring Point

SKU:
QT604
£61.03
Width:
8.70 (cm)
Height:
8.70 (cm)
Depth:
2.90 (cm)
Current Stock:
Adding to cart… The item has been added
Description

Quantec Monitoring Point, Button Reset

 QT604

  • A keyswitch-isolatable monitoring point c/w a RESET button for cancelling calls.
  • Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is opened (via magnetic contacts) or a telephone or door bell rings.
  • Can be used to monitor any device with a normally open or normally closed switch - ideal for interfacing PIRs, strip switches, flow switches and other devices to Quantec.
  • Red/green reassurance LED.
  • When isolated, the QT604's reassurance LED will illuminate Green and the monitored door or device may be opened and closed without signalling a call on the system. 
  • Mounts on a standard UK 25mm single gang flush or surface back box.
  • QT604M secure magnetic reset version also available.
Quiescent current TBC.
Alarm current TBC.
Indicators Red/Green Reassurance LED (lit green when device is isolated).
Controls Isolation keyswitch (switches monitoring off when ISOLATED); Reset button (cancels calls made from the monitoring point and from devices wired on the same Zone). Note that a QT604M magnetic reset version is also available.
Connections Net +: Net -; R; G; L+; SW,
Expansion connections R (Red) and G (Green) connections allow the connection of an optional slave overdoor light. Alternatively G (Green) and SW (Switch) can be used for an optional Call Alert Unit allowing telephone monitoring (see instructions).
Onboard 6.35mm Remote Jack Socket No.
Onboard Infrared Receiver No.
Product dimensions (mm) 87 W x 87 H x 29 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish Plastic.
IP Rating IP41.
Weight 90g
Operating conditions/temperature -5ºC to +40ºC. Max. relative humidity 95% non-condensing.