QT602RS Addressable Infrared Call Point

QT602RS Addressable Infrared Call Point

C-TEC
SKU:
QT602RS
£59.98
Width:
8.70 (cm)
Height:
8.70 (cm)
Depth:
3.50 (cm)
Current Stock:
Adding to cart… The item has been added
Description

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder & Remote Socket

 QT602RS

  • A programmable Quantec addressable call point c/w infrared receiver, call follower sounder and remote jack socket.
  • Includes a Call button, Reset button and red/green confidence light.
  • Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters.
  • Can make up to 7 levels of call - Standard, Ensuite, Help Required, Emergency, Attack, Presence & Attendance (dependent on configuration and ancillary devices used).
  • Remote socket allows the connection of optional tail call leads, pressure mats, etc.
  • Can be programmed to operate in a multitude of ways using a QT423 configurator.
  • Connections provided for additional slave devices such as ceiling pulls, overdoor lights, slave infrared receivers and more.
  • Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night mode (see Technical Specifications for further details).
  • QT602RSM magnetic reset version also available.

Power requirements Nominal 24V DC (from Quantec Controller/Network).
Quiescent current Less than 3mA.
Alarm current 14mA.
Indicators Red/green confidence LED.
Controls Call button; Reset button. (QT602RSM magnetic reset version also available).
Connections Net +: Net -; R; G; L+; SW; IR; SLV.
Expansion connections R; G; L+; SW; IR & SLV terminals allow the connection of optional slave overdoor lights, slave call points, slave ceiling pulls and slave infrared receivers.
Onboard 6.35mm Remote Jack Socket Yes - for the optional connection of tail call leads/pear pushes, pressure mats and movement detectors.
Onboard Sounder Yes - can be optionally used for Quantec's Call Follower Sounder feature (if Quantec is in Night mode and the call point is in Presence, the call point will emit a soft tone to let staff know if a call occurs elsewhere on the system (as programmed).
Onboard Infrared Receiver Yes - will accept calls from compatible Quantec infrared transmitter.
Product dimensions (mm) 87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finish Plastic.
IP Rating IP20.
Weight 75g.
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.