Ceiling Pull Cord Unit
NC807C
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
| Quiescent current | 0mA (none). |
| Alarm current | Determined by the type of control equipment and the number / type of field devices connected to the system. |
| Indicators | Red reassurance LED/diffuser (active in Alarm). |
| Controls | Red pull cord c/w two red open-sided triangular bangles. |
| Onboard Sounder | No. |
| Product dimensions (mm) | 93mm diameter x 27mm deep. Designed for ceiling mounting only. Base fits 16mm conduit and BESA centres. |
| Construction & finish | Plastic. |
| IP Rating | IP21. |
| Weight | 55g. |
| Operating conditions/temperature | -5ºC to +40ºC. Max. relative humidity 95% non-condensing. |
